
Take our advice to avoid costly pitfalls.
Exterior lighting can be a big investment, so it’s important to take advice in order to avoid any costly pitfalls. Get it right and a beautifully designed lighting scheme will enhance the prestige of your building, adding texture and impact. Get it wrong, and problems such as glare could distract workers inside and cause accidents outside. And then, of course, there’s light pollution and building regulations to consider.
Showcase your building’s assets.
Exterior architectural lighting can be incredibly effective in bringing another dimension to your building; bringing this valuable asset to life long after staff have gone home and the busy day has ended. Use it to pick out interesting architectural elements, flood the walls with colour or images, or to enhance your brand. It can be subtle, stunning, or a showstopper; whatever the brief, the result is always highly effective.
An investment for the long-term.
Commercial exterior lighting has a lot to contend with, be it vandalism, the weather, or careless passers-by. You’ll need robust, correctly specified products and systems to stand up to the daily and enduring wear and tear. Low maintenance, easy to control and cost-effective products are a must. Energy-efficient lighting on sensors, with robust mounts, is a good foundation.
Bring new energy to architecture.
Highlighting structural elements, texture and dimensions of a building, exterior architectural lighting can bring new energy to architecture and the landscape surrounding it.
Some of Our Exterior Lighting Products
Book a Consultation
Here's what great exterior lighting looks like.
How to plan commercial exterior lighting
Start with the purpose
Decide what each area needs: safe access to entrances, paths and car parks, security, or showing off the building after dark.
IP and IK ratings
Outdoor fittings need suitable ingress protection. IP65 or above is typical for exposed walls and soffits, with an IK impact rating where fittings are within reach.
Glare and light spill
Aim light where it is needed and shield it from neighbours and the sky. The ILP guidance note on obtrusive light sets limits by environmental zone, and planning conditions often refer to it.
Colour temperature
Warmer light, around 3000 K, is often preferred outdoors, especially near homes and in sensitive areas.
Controls
Photocells, time clocks and presence detection keep lights off when they are not needed, cutting energy use and light pollution.
Emergency lighting at exits
BS 5266-1 calls for emergency lighting outside each final exit. Our IP65 emergency bulkheads suit this.
Exterior fittings we supply
As well as the products below, we supply exterior wall lights from LedsC4, IP65 downlights for canopies and soffits, and IP65 emergency bulkheads. If your scheme needs something we do not list, ask us and we will source it. See an example in our exterior and office lighting for a net-zero build.
Who we work with on exterior projects
Exterior schemes need durable, well-controlled lighting that suits the building and its surroundings. Here is how we support each member of the project team.
Architects and interior designers
Fittings that suit the design intent, with samples, finish and RAL options, and made-to-measure or bespoke versions when a standard product will not do. Visit our Bristol showroom or book a CIBSE-accredited CPD for your team.
Contractors
A reply on your drawings or schedule within one working day, value-engineered alternatives when budgets are tight, lead times confirmed up front (2 weeks on our fast-delivery range) and delivery to your programme.
M&E consultants
Datasheets, LDT and BIM files, efficacy figures for Part L, DALI and Casambi controls, and emergency lighting to BS 5266-1:2025. Lighting layouts and calculations are included when we supply your fittings.
Building owners and occupiers
Efficient fittings and controls that cut running costs, long-life LED products and TM65 embodied-carbon reports on request.
Frequently Asked Questions
What IP rating do outdoor commercial lights need?
IP65 or above is typical for fittings exposed to rain, such as wall lights and soffit downlights. Fittings within reach of the public should also have an IK rating for impact resistance.
How do you avoid light pollution with exterior lighting?
By lighting only what needs lighting, using shielded fittings aimed downwards or at the facade, choosing warmer colour temperatures, and switching or dimming lights when they are not needed. The ILP guidance note on obtrusive light sets limits for each environmental zone.
Do you supply emergency lighting for outside final exits?
Yes. BS 5266-1 calls for emergency lighting outside each final exit, and our IP65 emergency bulkheads are designed for this.
Can exterior lighting be controlled automatically?
Yes. Photocells switch lights on at dusk, time clocks switch them off overnight, and presence detection brings them up only when someone is there.
Do you design exterior lighting schemes?
Yes. Send us drawings or elevations and we will propose suitable fittings and a layout. We reply within one working day.




